Sunday, Jan 1, 2017
Happy New Year! And, happy 24th anniversary to Tony and I!!
Today, the weather was nice enough we decided to install our keyless locks from RV Lock. We had tried to do so before this trip, but the locks didn't quite fit the hole and left a tiny gap that would let in water.
We contacted RV Lock, who sent us some vinyl gaskets to fill the space, as well as some spacers that I don't think we will need.
We drilled out the rivets which hold the old lock in place, then put the new lock in place and temporarily secured with two screws for placement. Then we drew around the lock as a template to help us position the vinyl gasket.
old lock removed, drawing of where new lock will fit.
Tony removed the lock and using the outline, I carefully positioned the gasket to stick down on the door. Then we reinstalled the lock.
vinyl gasket
New lock installed with gasket
Backside of new lock
New lock installed with gasket - this one would not retract the bolt, until we loosened the screws slightly on the back. Don't over tighten!
Voila! We are now KEY FREE to get into our basement doors!
No comments:
Post a Comment